“How much does it cost to re-roof a house?” is the first question almost every Brisbane homeowner asks us. The honest answer is that no two roofs are the same, so the price depends on your home. What we can do is show you exactly what drives the cost of re-roofing in Brisbane, so you know what you are paying for and can compare quotes properly.
The short answer: the cost of re-roofing a house comes down to the size and shape of the roof, how steep and easy to reach it is, what is coming off, the new roofing you choose, and extras like insulation, gutters and ventilation. The only accurate figure is a measured quote, and ours is free.
What affects the cost of re-roofing a house
1. Roof size and shape
The more square metres of roof, the more sheeting, screws and labour it takes. Shape matters just as much. A simple gable roof is quicker to cover than a roof with lots of hips, valleys and changes in direction, because every one of those needs cutting, flashing and extra care to keep it watertight.
2. Pitch, height and access
Steep roofs and two-storey homes need more safety equipment, such as edge protection or scaffolding, and they take longer to work on. Tight access, like a narrow side path or a home on a sloping block, can also add time for getting materials on and old roofing off.
3. What is coming off
Stripping old concrete or terracotta tiles is heavier work than removing old metal sheets, and the old material has to be taken away and disposed of. Older homes can also have asbestos in eaves or roofing, which must be removed by a licensed asbestos removalist before any roofing work starts.
4. The roofing you choose
Most Brisbane re-roofs today use Colorbond® steel. The profile you pick affects the price and the look. Corodek® is the classic corrugated profile, Trimclad® suits roofs with a low pitch, and Metlok 700® is a concealed fix roof with no visible screws. We use Metroll® roofing on our jobs and can walk you through the options on site.
5. Battens and roof framing
When you change from tiles to metal, the roof often needs new battens spaced for metal sheeting. If we find rotten or damaged timber once the old roof is off, it needs replacing before the new roof goes on. A good quote explains how this will be handled.
6. Insulation and sarking
A re-roof is the best time to add insulation, because the roof is already open. A foil-faced insulation blanket under metal sheeting cuts heat coming into the house and softens rain noise, which makes a big difference in a Queensland summer.
7. Gutters, fascia and downpipes
If your gutters are rusted or undersized, replacing them at the same time costs less than doing it later as a separate job, and it gives you a matching finish. Fascia and downpipes can be done together too.
8. Ventilation and natural light
Whirlybirds or roof vents let hot air escape from the roof space, and skylights bring daylight into dark rooms. Both are easier and cheaper to add while the roof is being replaced.
Tiles to Colorbond®: is it worth it?
For many Brisbane homes, swapping old tiles for Colorbond® steel is the reason for re-roofing in the first place. Steel sheeting is much lighter than tiles, has far fewer joins for water to get through, and needs very little maintenance. There is a wide range of colours to suit your home, and lighter colours reflect more of the sun’s heat. If you are weighing up the options, our guide on how long Colorbond® lasts is a good next read.
How to compare re-roofing quotes
Two quotes can look very different simply because they include different things. Before you decide, check each one for:
- A QBCC licence number. Roofing work in Queensland over the threshold must be done by a licensed contractor. Our article on QBCC rules for roofing explains why it matters.
- Insurance. Ask for proof of public liability insurance.
- Named materials. The brand, profile and colour of the sheeting should be written on the quote.
- Removal and disposal. Make sure taking away the old roof is included.
- Insulation, flashings and ridge capping. These are easy to leave off a cheap quote.
- Gutters and downpipes. Check whether they are being replaced or reused.
- Warranty. Ask what is covered, for how long, and whether it covers workmanship as well as materials.
A noticeably cheaper quote is often missing one of these items. Our article on how to avoid a bad roof replacement covers the warning signs.
Repair or re-roof?
Not every tired roof needs replacing. If the problem is a few rusted sheets, loose screws or a single leak, a roof repair may be all you need. A full re-roof starts to make sense when rust is widespread, leaks keep coming back after repairs, or tiles are cracking and slipping across the whole roof. We will always tell you honestly which one your roof needs.
Spreading the cost of a new roof
A new roof is a big investment, and it is often needed before you planned for it. SIG Roofing Group offers pay later with Elepay, so you can get the work done now and pay over time.
Frequently asked questions
Can you put a metal roof over tiles?
No. The old tiles are removed first, then the battens are checked or replaced so the new metal sheeting can be fixed down properly.
How long does a re-roof take?
It depends on the size of the roof, the access and the weather. We give you an expected timeframe with your quote, so you can plan around it.
Will a new roof make my home cooler?
It can. A lighter Colorbond® colour reflects more heat, and adding insulation under the new roof reduces the heat that reaches your ceilings. Ventilation such as whirlybirds helps hot air escape from the roof space.
Get a free re-roofing quote in Brisbane
The quickest way to know what your re-roof will cost is to have us measure it. SIG Roofing Group has more than 20 years of roofing experience across Brisbane and South East Queensland. We are QBCC licensed and fully insured, and we offer guarantees of up to 30 years. Request a free quote or call us on 1300 744 766.




